Datalogic Industrial Automation


Лазерные считыватели штрих-кодов

	AL5010 AL5010 is a high performance industrial laser scanner with cutting edge integrated control technology meeting the demands of existing and new automated facilities.With 1200 scans per second, the AL5010 can support applications with very high transport speeds or small bar codes. With its rugged construction, IP65 protection class, 50° C max operating temperature and internal oscillating mirror, the AL5010 is purpose built for the most demanding industrial environments.
	DS1100 The DS100 embedded bar code reader is an ultra-compact cost-effective laser scanner characterized by very compact dimensions, motor on/off software commands, wide reading width at a short reading distance, lightweight <100 g, built-in RISC decoder, scanning speed of 500scans/sec, dual high speed serial interface, IP65 rugged industrial housing.
	DS1500 The combination of extremely compact dimensions and powerful high speed reading capabilities makes the DS1500 scanner ideal for demanding OEM applications. DS1500 miniaturization allows easy integration into OEM equipment and automatic machinery. The high scan rate and sophisticated electronic design effectively suits difficult reading conditions.
	DS2200 The DS2200 embedded bar code reader is an ultra-compact laser scanner with built-in decoder, 500scans/sec, reading distance from 50 to 220mm. Compact dimensions Excellent reading capabilities Designed for OEM integration Very high density code reading (up to 0,076mm/3mils)
	DS2100N The new DS2100N industrial laser bar code reader takes advantage of Datalogic Automation's successful experience in 1D bar code reading, satisfying the demanding application needs of the largest manufacturers worldwide. DS2100N provides greater profitability and productivity in the most common warehousing, shop floor and OEM applications.
	DS2400N The new DS2400N industrial laser bar code reader takes advantage of Datalogic Automation's successful experience in 1D bar code reading, satisfying the demanding application needs of the largest manufacturers worldwide. DS2400N provides greater profitability and productivity in the most common warehousing, shop floor and OEM applications.
	DS4800 DS4800 is a flexible and compact laser scanner for industrial application, satisfying all main identification needs of your manufacturing plants. DS4800 features an excellent reading performance, ease of setup thanks to X-PRESS™interface, high-speed ID-NET™ communication interface and total immunity against ambient light. Smart Focus Adjustment optimizes reading performances based on reading distances using a single model. DS4800 series includes Subzero models (both Linear and Oscillating Mirror), extending operating temperature to -35°C +50°C by means of the smart internal heater and de-frost window.
	DS6300 The high performance DS6300 industrial laser bar code scanner presents the new Step-a-Head™ feature, new "2-step" optics, reading range from 250 to 2.000 mm, advanced decoder with code reconstruction capability (ACR4), good reading performance on very low contrast bar codes, display and keyboard, new GENIUS™ SW configurator.
	DS6400 The high performance DS6400 industrial laser bar code scanner presents the new Step-a-Head™ feature, reading range from 300 to 2.500mm, new FLASH™ dynamic focus, advanced decoder with code reconstruction capability (ACR4), display and keyboard, new GENIUS™SW configurator and PackTrack™ function.
	DS8100A The new DS8100A industrial bar code reader is a high performance linear laser bar code reader designed to satisfy the needs of sorting applications in the Transportation & Logistics sector. With top-class reading performance and flexibility of use, the DS8100A is the standard reader for the most challenging applications.
	DX8200A The new DX8200A is a high-performance X-pattern laser scanner capable of omnidirectional bar code reading that provides an economical and easily installed single scanner solution for Transportation and Logistics needs. The X-pattern design allows a single DX8200A do the work of two DS8100A's for many applications. Setup is thus quicker and simpler thanks to the precalibration built into the DX8200A. Connectivity to the most popular networks is assured with Profibus and Devicenet available in addition to Ethernet communications.
	AXIOM The AXIOM line of laser barcode readers is designed with industrial and manufacturing applications in mind. The AXIOM line scanners offer high-speed scanning and high reliability in a rugged industrial enclosure with a large depth of field that provides accurate barcode reading at distrances greater than 60 inches.
	AXIOM-X The AXIOM-X omni-directional laser barcode reader is designed with industrial and manufacturing applications in mind. The AXIOM-X scanners offer high-speed scanning and high reliability in a rugged industrial enclosure with a large depth of field that provides accurate barcode reading at distances greater than 60 inches.
Камеры считывания штрих-кода

	TC1200 TC1200 represents the state-of-the-art-technology in CCD technology setting new standard in Auto-ID market for OEM applications and entry level Factory Automation. Thanks to innovative CCD technology, TC1200 offers excellent reading performance, great decoding capability, outstanding product reliability combined with ease to use HMI interface. TC1200 is also available in Scan Engine package very useful for applications where the CCD reader is applied inside a machine.
	DATA VS2 ID and PRO The DataVS2 ID and PRO vision sensors perfectly match the ease-of-use and the cost-effectiveness of DataVS2 with the powerful decoding libraries coming from the Datalogic tradition thus representing the perfect entry-level solutions for all the identification needs. DataVS2 PRO also features a wide range of inspection algorithms thus allowing to read codes and perform quality verification at the same time.
	POWERSCAN D8590 The POWERSCAN D8590 is an ultrahigh performance handheld imager for DIRECT PART MARK reading. Thanks to a perfect combination of the embedded multiple lighting system and the aggressive DPM decoding algorithms, the POWERSCAN D8590 easily reads any challenging Direct Part Mark codes (DPM). The embedded multiple axis illuminator - low angle and dome – and the dynamic automatic lighting control enable a robust reading with the toughest DPMs, on flat, shiny, curved surfaces or dot peening codes. The high processing speed allows the POWERSCAN D8590 a very fast decoding, for the maximum operator productivity. POWERSCAN D8590 is extremely easy to use. The reader integrates an aiming system for simple point-and-click targeting and the reading acknowledge is intuitive thanks to the audible, vibrator, and multipurpose visual user systems.
	Matrix 210™ Matrix 210™ is the new Datalogic 2D reader offering extreme reading performance and integrated Ethernet in a ultra-compact housing. Thanks to the WVGA image sensor, capturing up to 60 frames per second and to the powerful internal illuminator, Matrix 210™offer extreme dynamic reading capability. The unrivalled decoding libraries running on the new high speed hardware platform deliver superior reading robustness and impressive decoding rates, supporting high system throughput and so improving efficiency of productions.
	Matrix 410™ The Matrix 410™ is the modular, flexible and versatile compact bar code 2D reader for industrial applications embedding 1.3 and 2.0 megapixel sensors. Matrix 410™ features excellent performances in reading and verifying, easy setup, thanks to the X-PRESS™ interface and patented Blue Diamonds™ system, ease of use, extreme flexibility, high versatility and industrial strength.
	Matrix 450™ MATRIX 450™ is the high-end industrial 2D reader designed for logistic applications. Through 5 million pixels captured 15 times in a second, MATRIX 450™ enables a range of applications never covered before by a 2D-imager. MATRIX 450™ perfectly meets the requirements of both automated and manual material handling.
	AV6010 The AV6010 is a high-performance, long-range camera barcode reader. The AV6010 provides outstanding image quality and performance for the most demanding 1D and 2D symbology applications, combined with the industry's highest reliability and easiest installation.
	NVS9000™ The NVS9000™ is the Datalogic Automation industrial high-end camera system, designed to drastically improve the productivity of postal, mail order and distribution companies. NVS9000™ embeds the latest and most powerful camera technology of the market into a modular, easy and reliable product. NVS9000™ delivers top reading performance, simple integration, easy installation and top industrial reliability for a very low customer total cost of ownership.
Измеритель объема

	DM3500 The DM3500 uses a scanned, triangulated CCD camera / laser diode combination to capture the lenght, width and height profile of a package as the passes the unit. The DM3500 is certified for Legal-for-Trade applications and works in cuboidal, near-cuboidal, irregular, singulated and non-singulated package flows.
Соединительные коробки

	SC4000 The SC4000 is an industrial controller designed for high speed data collection in an ID-NET™ network of Datalogic Automation's 1D/2D code readers. SC4000 offers high communication performance and connectivity to the most common fieldbus systems by means of a complete range of optional modules.
	CBX100 The CBX series is a connectivity device designed to simplify and speed-up cabling operations during the installation of Datalogic Automation devices. Thanks to its modular concept and the complete range of optional modules, any installation, configuration and maintenance operation is now accomplished faster than ever.
	CBX500 The CBX series is a connectivity device designed to simplify and speed-up cabling operations during the installation of Datalogic Automation devices. Thanks to its modular concept and the complete range of optional modules, any installation, configuration and maintenance operation is now accomplished faster than ever.
	CBX800 The CBX800 connectivity device is an industrial gateway allowing the connection of devices equipped with a standard RS232 communication interface to the most common fieldbus systems, by means of a complete range of optional modules and to ID-NET™ high speed communication network.
	QL and QLM Quick Link series is a complete list of accessories for connectivity dedicated to 1D and 2D code readers. The aim of Quick Link accessories is to offer an easy, fast, modular and cost-effective solution for the applications in which "plug-in connection" is preferable.
	SC6000 The SC6000 is the ultimate Datalogic Automation industrial bar code controller specifically designed for omni-directional multi-side reading tunnels. It offers all the necessary computational resources for very challenging applications where throughput, reliability and availability are key factors. A large number of communication interfaces are provided to satisfy all the most common demands. Ethernet, always available, can be optionally combined to Profibus and DeviceNet interfaces.
	Fieldbus-Toolkit The Fieldbus-Toolkit is the primary development kit whenever you have to connect Datalogic Automation Fieldbus powered devices to most common PLC systems. You have not to start from scratch the implementation of application drivers (i.e. DAD driver) or remote configuration (i.e. host mode); thanks to the Fieldbus-Toolkit you can integrate into your PLC applications samples and components. All Fieldbus-Toolkit are freely downloadable ( go to download section) and ready-to-use.

ИДЕНТИФИКАЦИЯ